T 0264/99 14-11-2000

1. The appeals comply with the formal requirements of Articles 106 to 108 and Rules 1(1) and 64 EPC. They are therefore admissible.

2. Two of the amendments made to granted claim 1 to arrive at the claim accepted in the Opposition Division have been objected to by the appellants.

The first is the requirement that the tubular support element comprises a "single" extruded tubular body of circular cross-section. This requirement was added in order to help distinguish the claimed subject-matter from prior use E2, this support element comprising coaxial inner and outer tubular bodies. The appellants argue that the "negative" feature of there being only one tubular body cannot be derived from the absence of a second tubular body in the drawings of the application. In decision T 170/87 (OJ EPO 1989, 441) it was held that the absence of a feature in a figure which serves only to give a schematic explanation of the principle of the invention could not be used as the basis for the incorporation into a claim of a statement excluding the presence of such a feature. The circumstances considered in this decision are however in no way comparable with those of the present case. Although Figure 3 of the drawings is designated as a "schematic cross-sectional view" of the tubular element there can be no doubt in the circumstances that it is intended to provide a definitive illustration of the cross-section of the tubular element according to the preferred embodiment of the invention. Equally there can be no doubt that this preferred embodiment comprises a single tubular body of circular cross-section provided with integral longitudinal ribs on its inner surface.

The second amendment objected to by the appellants concerns the addition of the requirement of the ribs "directly projecting in an approximately semi-circular way" from the inner surface of the tubular element. As the Board understands it, the only sensible interpretation of this requirement is that each rib has an approximately semi-circular cross-section. It is common ground that if a basis for this amendment is to be found then it can only be sought in the drawings of the original application, in particular Figure 3 as mentioned above. Now, as established in decision T 169/83 (supra), although it is in principle permissible to incorporate into a claim a feature only found in the drawings of the original application, this feature must be clearly, unmistakably and fully derivable from the drawings in terms of structure and function by the person skilled in the art and so relatable by him to the content of the description as a whole to be manifestly part of the invention. The appellants argue that the clear and unmistakeable derivation of an "approximate" relationship is in any case a contradiction in terms. For the Board, that is not necessarily true. It depends on the circumstances.

In the present case the person skilled in the art looking at Figure 3 of the original application will immediately recognise that the recess in each rib is of circular cross-section and that the radially inner surface of the rib has a semi-circular profile centred on the centre of the recess, giving a constant wall thickness in this region. The centre of the recess lies however somewhat radially inwardly of the inner surface of the tubular body so that the rib, in addition to its radially inner semi-circular portion, also has relatively short transitional portions adjacent the inner surface of the tubular body, where the wall thickness of the rib increases. The first question that needs to be answered is therefore whether the shape of rib just described can be fairly defined as having an approximately semi-circular cross-section. In the opinion of the Board, having regard to the relative extent of the semi-circular and transitional portions of the cross-section involved, this question should be answered in the affirmative. The second question is whether the person skilled in the art would discern that the form of ribs shown in the Figure 3 of the drawings has not been merely arbitrarily chosen at the whim of the draftsman but constitutes a technical teaching related to the solution of the technical problem with which the claimed invention is concerned, namely providing cheap and effective means enabling connection of the tubular support element to a drive motor. Again, the Board sees this requirement as being met since the skilled person will recognise that the simple and compact form of the ribs contributes to an optimization of the distribution of the available material of the cross-section of the tubular element considered as a whole.

Accordingly, the Board comes to the conclusion that claim 1 as accepted by the Opposition Division does not offend against Article 123(2) EPC.

Independently of its impact on this issue of added subject-matter the appellants also argued that the use of the term "approximately" in claim 1 went against the requirement of Article 84 EPC that the claims be clear. However, as explained above, it is apparent from the patent specification considered as a whole that the degree of departure from a semi-circular cross-section of the rib is determined by technical considerations which effectively circumscribe the ambit of the term "approximately" as used in the claim. This objection of the appellants also therefore fails.

3. In the normal sequence of events considerations concerning the novelty of the subject-matter of a claim would be dealt with before turning to inventive step. In the circumstances of the present case, however, it is clearly appropriate to address first the question of whether the subject-matter of claim 1 is obvious having regard to the uncontested prior uses E1 and E2, as argued by the first appellants. In this context it should be noted that at the oral proceedings before the Board the alleged prior use E2* was no longer pursued.

The tubular support element of prior use E1 has a complex cross-section comprising three equiangularly disposed rib portions joined by corrugated wall segments, the radial height of the corrugations corresponding in essence to that of the ribs. Each of the ribs is provided with a recess for receiving fixing means by which the tubular element is coupled to the coupling flange of a drive motor. The recesses are not closed but are open to the radially outside surface of the respective rib.

The tubular support element of prior use E2 is simpler than that of prior use E1. In cross-section it comprises inner and outer circular walls which are interconnected by three bridges. Each of these bridges has an enlarged central portion of circular cross-section provided with a closed recess of circular cross-section for receiving fixing means.

It is evident from prior uses E1 and E2 that the basic idea underyling the claimed invention, namely to dispense with separate flange elements which had to be attached, eg by welding, to the ends of the tubular support element and instead to provide means directly within its cross-section for receiving fixing bolts or the like, was known in the art. It does not follow from this, however, as the first appellants have in effect argued, that any cross-section which achieves the same end, including that presently claimed, is a mere design variation devoid of an inventive merit. The respective cross-sections of the prior used tubular support elements have evidently been carefully and specifically designed not only to provide recesses for fixing means, but also having regard to the overall structural stiffness required from the element when it is in service. Each of them represents a complete and self-contained technical solution in its own right and neither of them can give any hint to the person skilled in the art that a different solution corresponding to that claimed would be advantageous. As a consequence, the subject-matter of claim 1 cannot be seen as being obvious to the person skilled in the art having regard to prior uses E1 and E2, this being the appropriate yardstick for judging inventive step (Article 56 EPC).

No different conclusion would be reached if account were taken of the allegedly prior used aluminium tubular elements referred to by the first appellants in their letter of 12 September 1999. Not only are the fields of application of the tubular elements involved in no way comparable to that of the claimed subject-matter but also are the ribs of the illustrated cross-section neither closed, nor of approximately semi-circular form.

4. Having regard to the above it is apparent that the fate of the contested patent depends on the alleged prior use E3. As a starting point it is useful to establish here the little which is common ground between the second appellants and the respondents: following discussions between representatives of the two companies at the end of 1992 an offer to supply to the second appellants washing brush sets comprising either flanged steel "pipes" (ie tubular support elements) or flangless aluminium pipes was made by the respondents by fax of 4 June 1993 ("Anlage E1"); in the same month a delivery to the second appellants of two sets of washing brushes was made at a total price of ITL 1. 744 000 (see "Anlage E2"); in the spring of 1994, after the priority date of the contested patent, the second appellants introduced a new series of automated car washes incorporating washing brush sets purchased from the respondents, the tubular support elements of these washing brushes corresponding to the contested patent. The rest is in contention. In particular, the respondents argue that the second appellants have not proven that the support elements of the washing brushes delivered before the priority date of the patent had the form defined in present claim 1. After the length of time that has elapsed they themselves are however unfortunately not in a position to provide documentary evidence that this was otherwise. Furthermore, they contend that this initial delivery of a small number of washing brushes was for preliminary testing and development only, with the consequence of a tacit understanding of confidentiality between the two companies.

The Opposition Division, citing decision T 782/92 (not published in OJ EPO), found this latter contention convincing. However, the Board sees significant distinctions between the circumstances considered in that earlier case and the present one. Here, there is no indication from the evidence on file that the washing brushes were sold to the second appellants as anything other than finished products; there is no suggestion that any joint development of the washing brushes took place; the only purpose of the testing was to see how the washing brushes performed under service conditions. Furthermore, the second appellants argue that the area where this testing took place was frequently visited by external customers for their products under development, so that the basic underlying requirement for a tacit understanding of confidentiality could never have existed; in the present case, given that the development of the new series of automated car washes was very well advanced, there had been every reason to discuss all technical advances, with the potential customers including the new form of support element for the washing brushes. In contrast to the opposition proceedings, where the second appellants provided no evidence in this latter respect, they have now named the previous head of their test department (Mr Bentenrieder) as a witness. Thus, if there are any remaining doubts as to whether the sale of the washing brushes to the second appellants in itself constituted public prior use within the meaing of Article 54(2) EPC it will be necessary to hear this witness.

Since the Opposition Division took the view that there had been no public prior use of the washing brushes delivered to the second appellants in June 1993 it was not necessary for it to make a finding on what the form of the tubular support elements of those brushes was. In the opinion of the Board there is still, despite the submission of further documentary evidence, room for residual doubt here. The only piece of evidence purportedly dating from before the priority date of the patent which shows a cross-section directly equivalent to that of Figure 3 of the patent specification is "Anlage 1/4" to a fax from the respondents to the appellants with a date of typing of 12 October 1993. However, neither the content of this fax, not the circumstances surrounding why it was sent, are sufficiently clear to allow a definitive correlation between the cross-section shown in "Anlage 1/4" and the form of the support elements of the washing brushes actually delivered in June 1993. Aware of the relative weakness of the documentary evidence which they could supply, after all they were not the manufacturers of the products involved, the second appellants had already named in their notice of opposition Mr Schwab as a witness in this respect. In view of the decision that the Opposition Division arrived at it was not necessary for him to be heard. This is however unavoidable now.

For completeness it is necessary for the Board to deal with three further more peripheral aspects of the case made out by the second appellants. The first is that the meeting in December 1992 between employees of the two companies involved, at which the possibility of flangeless aluminium support elements was discussed, already constituted a public prior use of the invention. Notwithstanding the difficulty in establishing with sufficient certainty what was acutally discussed and on what basis, the Board is in any case of the opinion that the contents of such an exploratory discussion is subject to implicit confidentiality. The second is that the fax dated 12. October 1993 (if that indeed was when it was sent) not only represented significant evidence as to the form of the support elements of the washing brushes which has been delivered, for which purpose it had originally been filed, but also in itself constituted a prior publication of the claimed invention. As already indicated above the circumstances concerning the sending of this fax are however obscure and there can be no suggestion of it constituting a publication in any normal sense. Lastly, the further alleged prior use mentioned briefly in the statement of grounds of appeal was explained at the oral proceedings as being by way of a false delivery to another company of washing brushes, having tubular support elements as claimed, intended for the second appellants. The circumstances surrounding this alleged prior use are so nebulous that the Board saw no reason to depart from its already signalled intention not to admit this into the proceedings.

5. In summary, therefore, the Board comes to the conclusion that the issues surrounding the alleged prior use E3 can only be satisfactorily clarified by hearing Mr Schwab and possibly Mr Bentenrieder. In the circumstances it is appropriate that this be done by the Opposition Division rather than the Board itself in order to allow the questions involved to be aired fully before two instances.